一本久道久久综合久久,日韩在线黄色

The use of hot water radiant panels in large Spaces can reduce operation and maintenance costs

time：2023-06-27
hits：2018次
source：正弘奧能

The hot water radiation plate uses hot water, steam or hot oil as the heat conduction medium, flows in the radiation plate pipeline, and transfers heat to the radiation plate to generate infrared rays.The working principle is similar to the sun, sunlight hits the Earth's surface, the surface temperature rises, and then indirectly heats the air layer.80% of the heating capacity of the hot water radiant panel comes from this thermal radiation.Since the air absorbs almost no radiant heat, the radiant heat will directly heat the surface that is illuminated, such as the ground, objects, and people below it, and then release heat to the surrounding air.The temperature of the irradiated surface can be as much as 3 ° C above the ambient air temperature.The hot water radiant panel itself also heats the surrounding air by convection, which accounts for 20% of the heat.


	 


	The hot water radiant panel can be used for comprehensive heating of buildings with a height of 3m~30m and local area or local workplace heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.


	 


	<img src="http://www.wmkan.com/Uploads/image/20230627/20230627140424_35471.jpg" alt="" /> 


	 


	ECOPAN hot water radiation panel promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. is made of cold-formed steel plate, which is prefabricated into 3 meters and 6 meters in the factory (special requirements can be prefabricated into 2 meters and 4 meters) standard length.Each radiant panel can be connected with a quick connector.Each radiant panel and collection pipe is prefabricated in the factory and tested for safety.


	 


	With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market.This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.


	 


	The radiation panel pipe connection adopts advanced clamping technology, fast connection, simple and convenient, safe and reliable, which can shorten the construction period and save labor costs to a certain extent.After the pipe connection is complete, insert decorative cover plates between the radiant panels to cover the connection area and make the product look more beautiful.The decorative cover plate is fixed with a fixing card, which saves installation time and makes the installation work more time-saving and efficient.


	 


	<img src="http://www.wmkan.com/Uploads/image/20230627/20230627140439_76395.jpg" alt="" /> 


	 


	The decorative cover plate has the same profile as the motherboard, and laboratory tests confirm that the thermal energy efficiency of the decorative cover plate is exactly the same as that of the radiant panel.


	 


	The initial investment of hot water radiant panel heating is slightly higher than that of convection heating, but the initial investment can be saved back through energy savings within a few years.Metal radiant panels have no moving parts and are almost maintenance free.The design service life is generally twenty years.The water quality of the system operation should be softened water and should meet the national standards, and the system should be maintained with water during the heating season.ECOPAN hot water radiation panel can be used for more than 20 years.