黄色动漫在线看,欧美日韩国产精品成人

The modular installation method of ECOPAN radiant panel saves more time and effort

time：2025-02-20
hits：769次
source：正弘奧能

With the continuous growth of China's economy, the continuous improvement of industrial technology and people's living standards, the demand for heating, ventilation and air conditioning in large-space buildings has shown a characteristic of shifting from quantity to quality. Infrared hot water radiant panels are a type of metal radiant panel, which can be used for overall heating in large-space buildings or for heating in specific areas or work locations. Their application scope is very wide, including large shipyards, ship, aircraft and automobile repair halls, building materials markets, shopping centers, exhibition halls, multi-functional stadiums and entertainment halls, and many other places. 
 

	Hot water radiant panels can be normally hung from the roof. However, when there is a ceiling in the room, problems arise regarding the position relationship and connection method between the radiant panels and the ceiling. This not only affects the stability of the radiant panels and the ceiling as well as the heat dissipation effect of the radiant panels, but also influences the overall aesthetic effect. In response to these challenges, ECOPAN hot water radiant panels launched by Beijing Leadway Power Co., Ltd. offer the best production solution, making on-site operations easier, optimizing time and thus reducing costs. 


	 



	<img src="http://www.wmkan.com/Uploads/image/20250220/20250220102033_52193.jpg" alt="" /> 


 
ECOPAN hot water radiant panel is made of cold-formed pressed steel plates. On the steel plate shell, 2/3 of the surface is wrapped with electric welded or unwelded steel pipes with a diameter of 1/2" or 3/4". Under the same dimensional characteristics (pipe diameter, quantity and spacing, panel width), the Yikepan hot water radiant panel has a higher thermal energy efficiency than other products on the market, which can achieve the same heating requirements with fewer product quantities. 
 
ECOPAN hot water radiant panel uses a rectangular cross-section suspension bracket. The side edges are formed inside the panel, making it easy to place insulation materials. The insulation material covering the upper surface of the panel is a 40mm thick mineral wool pad, topped with aluminum foil. This solution enables the insulation pad to be placed quickly and evenly, allowing the glass wool to adhere perfectly to the metal panel. The adhesion is even further improved by using fastening rods at the top. To enclose the sides and hide the insulation pad, the side edges of ECOPAN hot water radiant panel are obtained from the same radiant panel. 
 
ECOPAN hot water radiant panel adopts a modular installation method. The head welding of the pipe liner is perfect, and the joint cover is easy to position. It uses a crimping connection method, which is quick to connect and simple and convenient. To a certain extent, it can shorten the installation time, making the installation work more time-saving and efficient.