久久久青,国内精品久久久久久久久长长

Why do we choose IMPRESIND Gas Radiant Heating System for industrial buildings?

time：2024-11-21
hits：907次
source：正弘奧能

The problem of heating large spaces has always been a difficult issue in the HVAC industry in China. Large spaces, such as single-story buildings over 10 meters high, have a large temperature gradient, and the simple convection traditional heating method cannot meet the heating needs of large-scale factory buildings. The insulation of large spaces is limited, and the warm air is quickly invaded and dispersed by cold air, so not only does the heating time take longer, a lot of energy is wasted, but it is also difficult to achieve the required heating effect. Therefore, from this perspective, many users of large-scale factory buildings for heating in China have chosen gas radiation heating. 
 

	Gas Radiant Heating is a method of heating that utilizes natural gas, liquefied petroleum gas, or artificial coal gas, which are combustible gases, to burn in special combustion devices called radiation tubes and emit various wavelengths of infrared radiation for heating purposes. Since the radiant heat is not absorbed by the atmosphere but rather by buildings, bodies, equipment, etc., it is converted into thermal energy. The objects that absorb heat, their own temperature rises, and then heat the surrounding other objects again by convection, such as the atmosphere. Therefore, the air temperature in the building does not cause serious vertical imbalance. Therefore, its heat energy utilization rate is very high and makes people feel very comfortable. Therefore, gas radiant heating is a more suitable heating method for industrial workshops and other high-ceiling spaces. 


	 
 


	<img src="http://www.wmkan.com/Uploads/image/20241121/20241121101459_25461.jpg" alt="" /> 
 

 
IMPRESIND gas radiant heating system promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. only requires connecting to the gas pipeline network and installing pressure regulating and stabilizing equipment at the system inlet. No boiler and other auxiliary equipment need to be installed, and the independent heater is usually installed outside the building. The radiation pipe is installed above the space in the building, which does not occupy the building's usable space. The initial investment is greatly reduced. 
 
IMPRESIND gas radiation heating system operates quietly without producing convective air, avoiding dust agitation in industrial workshops and improving hygiene conditions in the heated space. The indoor heating speed is fast and the heat distribution is even, providing a comfortable and gentle sensation. Additionally, considering that many factory windows have poor sealing and that the indoor air temperature of gas radiation heating is 2-3°C lower than that of convective heating, the heating system consumes less heat and the indoor and outdoor temperature difference is smaller, resulting in a smaller amount of cold air infiltration. By ensuring comfort while reducing heat energy consumption, the system achieves the goal of energy saving and lowering operating costs. 
 
IMPRESIND Gas Radiant Heating Controller can set different temperatures at different times of the day according to the user's needs. It can set a 5°C standby heating temperature, so there is no need to design a dedicated standby heating system. It can also set the working state of the equipment for different days of the week according to the user's needs, such as the starting time and different temperatures at different times. Therefore, this system is suitable for high-ceiling buildings, such as industrial workshops, warehouses, gymnasiums, garages, aircraft hangars, aircraft maintenance hangars, shipyards, etc.