国产精品视区,污网站在线观看视频

How does IMPRESIND Gas-fired Radiant Heating System help industrial heating in large space reduce operating costs?

time：2024-10-28
hits：985次
source：正弘奧能

In the heating of high-ceiling industrial workshops, the selection of gas radiation heating equipment only requires connecting to the gas pipeline network and installing pressure regulating and stabilizing equipment at the system inlet. No boiler and other auxiliary equipment need to be installed, and there is no heating water circulation system, which greatly reduces the initial investment. At the same time, the heating capacity of gas radiation heating equipment has strong directionality. The radiant heat is directly radiated downwards, and the ground can accumulate some heat. The temperature gradient in the indoor air is small, the heat loss is small, and the heat energy consumption is reduced while ensuring comfort, thereby achieving the goal of energy saving. It can be flexibly arranged according to different needs, and can be used for full heating or local heating in a large space according to the need for heating. This can greatly save energy consumption. 
 

	In terms of fire safety, many customers and designers may think that using gas radiation heating equipment requires the introduction of natural gas and liquefied petroleum gas pipelines into the workshop, which will undoubtedly increase the risk and raise the fire hazard level of the building. However, this is not the case. The gas radiation heating system promoted by Beijing Leadway Power Co., Ltd. uses IMPRESIND gas-fired radiation heating system, in which the heating generator is installed outside, avoiding fire and other risks. Moreover, the combustion in the equipment only occurs when the negative pressure in the radiation tube is formed, and the pipelines, valves, etc. are strictly sealed. The gas produced after combustion is directly discharged to the outdoors, meeting domestic environmental protection requirements. 


	 



	<img src="http://www.wmkan.com/Uploads/image/20241028/20241028112444_99168.jpg" alt="" /> 


 
IMPRESIND Gas Radiation Heating System heat generator burns natural gas, and the hot fluid generated flows in the radiation pipe under negative pressure driven by a centrifugal fan. The black anodized aluminum alloy steel radiation pipe at high temperature stimulates the emission of far-infrared radiation, directly acting on the objects and bodies in the heating area. After the heat exchange inside the radiation pipe, part of the products will be sent to the pre-mixing chamber for flue gas recirculation, greatly improving the heating efficiency and fully utilizing energy. The other part will be directly discharged outdoors. The double heating method achieves the goals of energy saving, environmental protection, and reducing operating costs, with a comprehensive energy saving of 30%-50%. 
 
IMPRESIND Gas Radiation Heating System uses an electronic data collection system through a black ball sensor placed in the heating environment to manage the different stages of combustion based on parameter settings and working hours to control temperature. The heating needs in the industrial field are diverse and involve different space and temperature requirements. The Ipside Gas Radiation Heating System has good adaptability and can meet the heating needs of industrial workshops, aircraft hangars, warehouses, etc. in high-ceiling spaces, achieving on-demand heating and reducing energy and operating costs. 
 
Currently, IMPRESIND&nbsp;gas radiant heating system has been successfully applied to the heating of the Shenzhen Aviation Hangar in Harbin, the heating renovation of the South China Airlines hangar in Urumqi Diwopu Airport, the heating of the logistics warehouse in the comprehensive bonded zone in Ordos, and the heating of the Langfang Mail Processing Center of China Post.