伊人久久综合成人亚洲,欧美一级a俄罗斯毛片,青娱乐自拍视频

Meet all kinds of tall space heating, choose ECOPAN hot water radiation panel

time：2024-06-24
hits：1116次
source：正弘奧能

For a long time, the heating of industrial buildings in China has been using traditional convection heating methods such as radiators and heaters, but with the continuous development of the industrial field, the original heating method has also revealed its drawbacks. First of all, the single building is large in scale, the radiator is difficult to arrange, and it is difficult to meet the design needs of tall space heating. Secondly, the height of the building is high, and the phenomenon of traditional convection heating is very serious. After more than ten years of actual use experience, we believe that: hot water radiant panel heating as a heating method of tall space industrial plants is a more ideal choice.


	 


	<img src="http://www.wmkan.com/Uploads/image/20240624/20240624113619_25027.png" alt="" /> 

 
Hot water radiant panels mounted on the ceiling, using hot water as the heating fluid. Thermal inertia is very low, hot water radiation panel is particularly suitable for industrial halls, offices, stadiums, stores, supermarkets and other tall space heating. This heating system reduces administrative costs as it allows full or partial operation interruption, with minimal warm-up times and small thermal gradients depending on the external temperature. 
 

	In high-space industrial heating, reducing vertical gradient heat loss means saving energy and economic costs. Therefore, the hot water radiant panel heating method is particularly suitable for replacing the old traditional convection heating method with general operation effect and limited efficiency. The hot water radiant panel heating method is now used, which does not require more maintenance, and the system can be designed to achieve different heating temperatures to achieve on-demand heating.


	 


	<img src="http://www.wmkan.com/Uploads/image/20240624/20240624113631_59744.png" alt="" /> 

 
By Beijing Leadway Power&nbsp;Co., LTD., the promotion and sales of the ECOPAN hot water radiation panel adopts an innovative design concept, the main feature of ECOPAN is: on the shell of the steel plate, with a diameter of 1/2 "or 3/4" electric welded or non-welded steel pipe wrapped 2/3 of its surface. Special attention is paid to the expansion between the pipe and the plate, as well as technical solutions that make installation easier. As the warmest part of the panel, the pipe is completely downward, and 70% of its surface is wrapped by the metal plate (the wrapping Angle is more than 280°), which increases the heat transfer area, and perfectly ensures the transfer of heat from the tube to the plate, reduces the convective flow, increases the radiation, and thus greatly reduces the energy consumption. There is currently no heating system that can achieve the best heating conditions at such a low cost as the good radiant system of the ECOPAN Hot water radiant Panel.