亚洲无人区视频在线观看,天天操夜夜揉

It is more energy saving to use gas radiant heating in large-space industrial buildings

time：2024-01-05
hits：1658次
source：正弘奧能

The height of the tall space factory workshop is generally about 10 meters, and even up to 20 meters or more, using the traditional convection heating method, the principle is to heat the air and other air in the whole room before heating the heat to the human body, the heating effect can not meet the needs of some enterprises, in addition, the traditional convection heating method of energy consumption is also relatively large. Heating costs are also high. 
 

	With the development of science and technology, gas radiation heating equipment has overcome the problem of poor heating effect caused by large area and poor heating property in tall industrial buildings. The infrared radiation heat emitted by the gas radiation heating equipment is to directly heat the human body or equipment, and then heat the air through the secondary radiation such as the human body or equipment, the heat distribution is uniform, and the heating is rapid, which is very suitable for the heating of the tall space plant, and can achieve different temperature requirements in different areas of the same plant. This not only saves the cost of equipment, but also greatly saves the cost of use.


	 


	<img src="http://www.wmkan.com/Uploads/image/20240105/20240105094145_43535.jpg" alt="" /> 

 

	In general, the traditional convection heating method requires more than 2 hours of preheating period, which is a great waste of energy, and gas radiation heating equipment will have a warm feeling after a few minutes, half an hour or so will reach the required temperature. The workshop will soon cool down after the general heater or central air conditioning switch is turned off, and the gas radiation heating equipment has the function of heat storage, and can maintain the required temperature within two hours of shutdown. In addition, if you use a heater or traditional heating method, the top of the tall space will be evenly heated, but those Spaces actually do not need to be heated, so it also directly causes a waste of energy. Overall, in a heating season, gas radiation heating can save 30%-50% energy than traditional convection heating.


	 


	<img src="http://www.wmkan.com/Uploads/image/20240105/20240105094154_25314.jpg" alt="" /> 

 
IMPRESIND gas radiant heating equipment, promoted and sold by Beijing Leadway Power&nbsp;Co., LTD., uses natural gas and liquefied petroleum gas as fuel, and the heating generator is installed outside the building, which does not increase the fire rating of the building. Therefore, it can be widely used in industrial plants, hangars, maintenance warehouses, warehouses, gymnasiums and other tall space buildings. Gas radiation heating equipment is directly installed on the outside of the tall space industrial plant, and the radiation tube is installed on the top of the tall space, which does not occupy the building space. The equipment is standard with all the required accessories, only need to find electrical wiring, no large civil engineering can make the tall space industrial workshop warm throughout the winter.