特大毛片,欧美激情黄色片

IMPRESIND gas radiant heating system has high thermal efficiency and high intelligence

time：2023-12-12
hits：1445次
source：正弘奧能

Gas radiation heating has long been used in foreign countries, and it has also been used in China, and it is mostly used in tall space industrial buildings. The gas radiation heating system uses natural gas to burn in the generator to produce high temperature flue gas, and the generated flue gas flows in the negative pressure radiation tube, so that the surface temperature of the radiation tube rises, and the high temperature surface of the radiation tube generates infrared radiation to transfer heat to the heating area. Infrared rays are absorbed after exposure to the human body, and the absorbed infrared rays are converted into heat energy to achieve the purpose of heating. Just like the sun in winter, the outdoor temperature is very low, but the sun emits infrared rays, people will have a warm feeling. This method changes the traditional method of heating all the air in the entire space, directly heating to the human body, no convection, no heat exchange and pipeline loss, so the thermal efficiency can reach 98%.

 

	Gas infrared radiation heating solves the problem of industrial heating in large space and the energy-saving effect is very obvious compared with the traditional boiler heating, especially for the intermittent use of places, the expenditure of heating costs can be reduced by more than 30%. Because the gas radiation heating method does not heat the air, it is especially suitable for the heating of tall space industrial plants with poor insulation and sealing conditions and often open the door. The switch is completely controlled by intelligent software hardware, preset time and temperature. If it is opened in the morning, it is automatically closed after work, and the duty temperature can be set at night, such as 5 ° C, low temperature maintenance, and no special person is required to be on duty. You can also do zoning temperature control, individual overtime only open part of the equipment, the rest are closed, to achieve local heating, saving energy. Other heating methods can not do this, this is the world's most popular tall space industrial heating energy saving an advanced method. Therefore, the operating cost of this heating form will be greatly reduced.


	 


	<img src="http://www.wmkan.com/Uploads/image/20231212/20231212102853_22829.jpg" alt="" /> 

 
IMPRESIND Gas radiant heating systems generate heat through special air generators. The fan brings the entire radiation tube system to negative pressure to extract the air necessary for combustion, recover the combustion products to achieve two heating (even the tube temperature) and exhaust the smoke through the exhaust pipe. The generator burns completely, so that the heat is fully utilized. 
 
High thermal effect 
The radiation tube is specially aluminized with high temperature resistance and has high emission performance, which can provide the necessary heat for the surrounding environment. The top of the radiation pipe section is laid with glass fiber thermal insulation foam and aluminum foil. 
 
Intelligent high 
It achieves electronic data acquisition through a black ball sensor placed in the heating environment, which in turn manages the different stages of combustion according to parameter Settings and working hours to control the temperature. 
 
High security 

	The combustion system is continuously controlled by an electronic control device each time the fan is started for heating, to ensure the air pressure of the radiation circuit, the ignition situation, to ensure the correct state of the flame, and to stop the burning gas immediately in case of an anomaly and place it in a safe area.


	 


	<img src="http://www.wmkan.com/Uploads/image/20231212/20231212102748_15160.jpg" alt="" /> 

 
The heating needs of the industrial field are diverse, involving different Spaces and different temperature requirements. IMPRESIND gas radiant heating system has good adaptability, can meet the heating needs of industrial workshops, hangars, warehouses and other tall Spaces, to achieve on-demand heating, reduce energy and operating costs.