四虎激情,www.哥也色.com

Hot water radiant panel heating energy saving effect is remarkable, wide range of application

time：2023-11-24
hits：1797次
source：正弘奧能

Tall space, limited heating, hot air quickly eroded away by cold air, so not only heating time is longer, waste a lot of energy, but also difficult to achieve the required heating effect, so from this level of analysis, many tall space plant heating users choose radiation heating. 
 

	Traditional heating can only be operated during the heating season, and once the heating is stopped, the pipeline equipment of the water heating system may be frozen and cracked. The radiant heating system can be started and stopped at any time as needed. Under the same indoor thermal comfort conditions, the air temperature required for radiant heating rooms can be at least 2 to 3 ° C lower than that for radiator heating. If the radiator is used for heating, the room temperature should reach at least 18 ° C; The use of radiation heating, the room temperature as long as 16 ° C can make people feel comfortable), so you can save a lot of heating energy. Compared with the traditional convection heating method, radiant heating can save 30%-50% of operating costs, and the energy saving effect is very significant.


	 


	<img src="http://www.wmkan.com/Uploads/image/20231124/20231124165431_94567.jpg" alt="" /> 

 
The ceiling hot water radiation panel is a heating equipment which is installed in the indoor ceiling of a building and heated by means of infrared radiation heat transfer. The ceiling radiation panel is the metal radiation panel combined with the tube plate as the radiation source, and the hot water as the medium, the hot water as the medium has these advantages: high thermal energy efficiency, convenient adjustment, strong heat storage capacity, good thermal stability, long transport distance, and small heat loss. 
 

	Description of the hot water radiant panel in the Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings: The ceiling hot water radiation panel is a kind of metal radiation panel, which can be used for comprehensive heating of buildings with a height of 3m~30m and local area or local workplace heating, and its use is very wide, including large shipyards, ships, aircraft and automobile maintenance halls, building materials markets, shopping centers, exhibition venues, multi-functional stadiums and entertainment halls and many other occasions.


	 


	<img src="http://www.wmkan.com/Uploads/image/20231110/20231110101709_77159.jpg" alt="" /> 

 
The heating system installed in the form of suspended ceiling is superior to the traditional radiator convection heating and hot air heating equipment, which solves the problem of poor effect and high energy consumption of convective heating in tall space. It is a new heating technology for tall space buildings. 
 
ECOPAN hot water radiation panel promoted and sold by Beijing Leadway Power&nbsp;Co., Ltd. is prefabricated into a standard length of 3 meters and 6 meters in the factory (special requirements can be prefabricated into 2 meters and 4 meters). Each radiant panel can be connected with a quick connector. Each radiant panel and collection pipe is prefabricated in the factory and tested for safety. With the same dimensional characteristics (pipe diameter, number and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. This makes it possible to use fewer products to meet the same heating requirements, saving on materials and installation costs.